Furniture Paint

by opacity

Hi,I did the following:, blog: how do you paint furniture & buy painting wooden furniture.
The following not about paint for wood,also not about the contents of the computer help,But ,a little bird told me, it is meaningful:Friendship is like earthenware: once broken, it can be mended; love is like a mirror: once broken, that ends it. (Josh Billings. American humorist)Friendship is love without his wings. (George Gordon Byron, Bdritish poet)Care and diligence bring luck..paint for wood–: Can I paint wood from cherry wood color to white?
I want to re-paint my kitchen from cherry wood color to white . Originally it was oak color, but now I think it is so dark and want to paint white. Looking for any advice. Thanks every one!

The following is the answer: (Hint: The answer is not necessarily.)

Answer by Decoy Duck
Yes, it is possible. The first step is to wash all the residue from the wood. Secondly, prime the cupboards with a good latex primer. Then paint your woodwork white. I’ve done this so many times I feel like I can do it in my sleep! I went from oak to white to hunter green and now a terra cotta color with dark green stencil (my counter tops are hunter green) and painted the walls a lighter color of the terra cotta.

Answer by Dave
I would remove the cabinet doors and if necessary, remove the hinges (you might want to replace them with a different color or style at this point as well).

I’d wash the cabinets and doors with a solution of TSP and then wipe them down with clean water and then dry them thoroughly.

I’d lightly sand the cabinets and doors just to scuff them a bit. Since cabinet doors are generally not very flat, you can use one of those sanding sponges that they sell to get in the cracks and grooves. You don’t need to do a great job of sanding, just helps improve the paint adhering.

Prime, let dry and then paint (a couple of coats is a good idea) with a good semi-gloss or gloss interior paint.

Let everything dry and then re-install the cabinet doors.

One word of caution, we did this last year and love the way it looks, but white cabinets show the dirt and spills that occur in a kitchen quite well. Just one thing to consider.

Answer by racer123
You must remove all the hardware first, to properly clean the panels of grease accumilations. Next you must assertain what the ‘final existing finish’ is. After determineing wheather it is ‘varnish’ or ‘polyurethane’ you must decide the appropiate ‘next layer’ to apply. Proper ‘scuffing’ is the next step to make sure that the final finish has proper adheasion and durabillity to withstand re-peatted cleanings. Enamel paint can now be adjusted to humidity and temperature fluxuations on a trustworthy basis for proper application and fluid smoothness in most circumstances. The thing is to maintain many of the most basic precautions of brush choice, timely application and spaced away air-times.

What do you think? Answer below!

by opacity

paint for wood

The following are not relevant to the content of some paint for wood,also not about the contents of the make money in blog,But ,a little bird told me, it is meaningful:A dress is like a barbed fence. It protects the premises without restricting the view.Success is a relative term. It brings so many relatives. Choose an author as you choose a friend..Q&A–: what is the best paint to use when painting wood paneling?
my whole room is wood paneling and i’m sick of it. i want to know if and how i can change the look of the paneling with out removing it. i want to paint in bright colors. what brand of type of paint is the best for this use?

The following is the answer: (Hint: The reader is not the correct identification.)

Answer by MAttsprat
PRIMER-BONDING SEALING-SHERMAN WILLIAMS
THEN PAINT

Answer by stretch
There is actually a type of paint on the market that’s intended for paneling. Regular paint won’t adhere to the slick surface of paneling. Also, many types of primers will also establish a good surface for a finish coat of paint as well

good luck

Answer by DIY Doc
With all due respect, and understanding your Q; “BEST” is a relative word, and here we all have opinions.

Certainly you’ll get answers that say PRIME first; and that might be a good start. The BRAND choice is nebulous.

Clean the paneling first; Prime with even an Oil based primer such as KILZ or ZINSER, which both accept Latex, after, and choose your colors.

Steven Wolf

Answer by deserontoshamrock
wash walls with TSP, aka trisodium phosphate.
Then BINZ or Zinnser primer, for bright or dark colors
tint your primer

Add your own answer in the comments!
_______________________

___________________