Furniture Paint

13 Responses to Epoxy|Epoxy 101

1. Xar0mir says:

   01/12/2011 at 13:52

   What does that have to do with epoxy?
2. Bestdriv3r8 says:

   01/12/2011 at 14:27

   @A1SurfShop also gives it shape^
3. stoyashot says:

   01/12/2011 at 15:04

   How do i come in contact to Greg Loehr because I want to know which type of hot wire he used for that machine and what kind of powersupply?
4. MalibuCornelius says:

   01/12/2011 at 15:51

   What? No fiberglass laminating into the epoxy?
5. kayakincheese says:

   01/12/2011 at 16:37

   you mean laminate with epoxy and fiberglass?

   yup, go for it. copy your favourite board, make whatever changes you want to make and use a fuck load of glass.

   dont know where you would get fittings for the board but if you wake surf you prob know somwhere?
6. jumboboy93 says:

   01/12/2011 at 17:14

   thank’s!
7. kayakincheese says:

   01/12/2011 at 17:31

   its a filler, to stop all the resin souking out of the glass and into the foam when he glasses it.

   lots of different stuff can be used, i dont know what hes got. ive only used a glass based powder which you mix with resin.
8. jumboboy93 says:

   01/12/2011 at 18:08

   how it’s called that thing he’s putting on the blank at 3:01 ??? it’s important
9. Wakesufer1253 says:

   01/12/2011 at 18:12

   could it work if i wanted to make a wakesurf out of eps board that was 1 1/2 inches thick and i coated it with a few coats of epoxy?
10. A1SurfShop says:

    01/12/2011 at 18:49

    He’s cutting the blank in half with a hot wire, and then glues it back together with a wooden stringer down the center of the board. This adds stiffness.
    If you’ve ever tried cutting polystyrene foam with a saw, you’ll know that it does not cut cleanly. Using a hot wire, it melts the edges and is absolutely straight.
11. captvesuvius says:

    01/12/2011 at 19:21

    Why do uou cut the blank in half with your hotwire? It then looks like you glue in back together.
12. SimoWill75 says:

    01/12/2011 at 20:12

    Do you mean the thing Greg calls a ‘blank’?
    It’s EPS Foam… Expanded Poly-Styrene, aka StyroFoam.
13. mickosis says:

    01/12/2011 at 20:24

    whats the name of that white thing that he is cutting